Wavesys PoE Lift Controllers

This Wavesys door access controller offers you a fast, easy, and cost-effective way of controlling your access control system without the need to install power points and electrical wiring. This door controller is compatible only with door control systems, alarm modules, turnstiles and elevators are not included in this.

TECHNICAL SPECIFICATION

 

  • Support 2 doors ie. up to 4x EM locks & 4x proximity readers over a single Cat 5e/6 cable without the need to have an external power
  • Supply at each door
  • Native IP with Peer to Peer communication
  • Ethernet communication cum power through a single Cat 5e/6 cable
  • High speed data transmission to server
  • Compatible with various reader technologies
  • Interlocking
  • On board battery charger
  • Client / server or active transmit
  • Built-in web server
  • Update firmware through web IE
  • AES- 128 Encryption
Technical Specifications
Microcontroller (MCU) FREESCALE CF 32 bits @ 60mHz
Memory 512 kb EEPROM & 16 Mb FLASH
Battery Charger (12 Vdc ) 7AH (Onboard battery backup charger)
Operating Temperature 0°C to 60°C
Humidity Range 0-85% non-condensing
Card Holder 75,0000(upgradable to 150,000)
Event 40,0000(upgradable to 80,000)
Reader Format Standard Wiegand (26 bit to 64 bit)
Controlled Floors up to 64 Floors
Input Points On-Board 4 (Fire / Tamper / Door Contact / REX)
Security Encryption AES-128
Holidays | Time Zones 50 | 3
Time Sets | Time Sets Interval 50 | 3
Redundancy Control TWO Destination (configurable) IP address
Software User Level 3 (web 100)
Communication Type RJ45 Ethernet | 10Base-T
Network Protocolsl TCP/IP, ARP, DHCP,WEB
Tcp/Ip, Arp, Dhcp,Web IEEE 802.3af (PoE 15.4W of DC Power)
Board Dimension | Weight 137 (L) x 117 (W) x 15.5 (H) mm | 25g (w/o casing)
Certifications CE – Class A | UL 294 List
Security Mark FCC Part 15 | Class A ROHS